Bearing Sleeves
Support bearings within roll stand housings and help locate roll tooling.
Send: stand position, sleeve photos, dimensions or drawing, machine model.View Bearing Sleeves ↗TUBE MILL PARTS / BUYER GUIDE
Spare Parts & Consumable Parts for ERW Tube Mills
Find the XFX parts family that matches your equipment, then send the machine and old-part details needed to check a replacement. We can also discuss spare-parts scope for a new tube mill project.
Parts are not universal. Fit and supply scope must be checked against the actual machine, drawings, dimensions, markings, photos or sample as appropriate.
01 / SPARE-PARTS FAMILY
Start with the machine section, then verify the individual part.
XFX lists mechanical and drive parts, HF welding parts, a burr-scraping knife, and cutting-system items. Use the product links below to identify the likely family; the final part still requires a fit check.
Find the right category
Browse the individual product pages for each part's function and the equipment section where it is used.
See all listed parts ↗Send matching evidence
Machine and part photos, markings, dimensions, drawings or a sample help XFX check the replacement requirement.
Prepare part details ↗Confirm the proposal
Ask the quotation to identify the exact item, quantity, compatibility basis and any associated supply or service.
Review quote scope ↗02 / XFX PRODUCT PAGES
Explore the listed spare parts.
Browse the product pages for each part family. A product page is an information starting point, not a promise that its pictured item fits your machine.
01 / ROLL STANDS & DRIVE
Mechanical and drive parts
Check the installed position, mating components and measured dimensions before ordering.
Bearings
Used in roll stands and other tube mill equipment where rotation is required.
Send: bearing number or marking, machine position, photos, measured dimensions if needed.View Bearings ↗Bevel Gears
Transmit motion between intersecting shafts in relevant gearbox arrangements.
Send: gearbox information, gear markings, photos, key dimensions or drawing.View Bevel Gears ↗Horizontal Shafts
Support roll tooling and rotating work in a tube mill roll stand.
Send: stand position, existing shaft photos, dimensions or drawing, machine model.View Horizontal Shafts ↗Transmission Shafts
Connect gearboxes, roll stands and related drive components.
Send: machine model, connection position, shaft photos, dimensions or drawing.View Transmission Shafts ↗02 / HF WELDING
Welding-section parts
Tube size and HF equipment details matter alongside the old part's dimensions.
Induction Coils
Work with the HF welder to heat tube edges before welding.
Send: welder and mill information, tube size, old-coil photos and dimensions.View Induction Coils ↗Magnetic Bars
Ferrite components used in relevant HF welding impeder arrangements.
Send: tube and HF welder details, impeder photos, existing bar dimensions.View Magnetic Bars ↗03 / WELD-SEAM PROCESS
Scraping parts
Confirm the existing tool arrangement and where it is installed.
Burr Scraping Knife
A replaceable part for burr removal or tube-edge finishing where fitted.
Send: scraper position, existing knife or rod photos, drawing or dimensions, tube information.View Burr Scraping Knife ↗04 / CUTTING SYSTEM
Blade and blade-maintenance items
Identify the saw and blade before discussing replacements or grinding.
Saw Blades
Hot-saw and cold-saw blades listed for tube mill cutting systems.
Send: saw type, old-blade marking and dimensions, tube material, size and wall thickness.View Saw Blades ↗Saw Blade Grinding Machine
Equipment for grinding or reconditioning compatible tube mill saw blades.
Send: blade type and size, saw information, blade photos and maintenance need.View Grinding Machine ↗03 / REPLACEMENT IDENTIFICATION
How to identify the correct spare part.
A machine model or one photo may start the discussion, but it may not establish an exact fit. Share as much of the following as available.
Machine & position
Equipment name, model, section and the exact location of the part.
Part identification
Part name, quantity, old part number or marking, nameplate and condition.
Measurements
Measured dimensions, drawing or a physical sample where needed.
Photo set
Whole equipment, installed position, close-up of the old part and markings.
Operating context
Tube and material details where they affect the component selection.
Problem to review
Describe wear, breakage, noise or changed tube quality without assuming a root cause.
Matching comes before a supply promise.
The part and surrounding machine condition may both need review. Replacing one item is not a guaranteed fix for the reported problem.
04 / EXISTING EQUIPMENT
Tell us whether XFX supplied the machine.
Start from the project record.
Send the original machine model, purchase or project information if known, equipment section, part name, quantity and clear photos. Add markings, dimensions or a drawing where available.
Even for an XFX machine, an exact replacement is checked against the installed configuration and part evidence.
Send XFX machine details ↗Show the installed interfaces.
Send the machine brand and model if known, full equipment and installation-position photos, old-part close-ups, markings, dimensions, drawings or sample. Describe the connection to adjacent components.
Brand or model name alone does not establish compatibility. Mechanical dimensions and the actual machine arrangement must be reviewed before any replacement is confirmed.
Discuss an existing machine ↗05 / NEW TUBE MILL PROJECTS
Plan spare parts alongside the equipment.
If you are buying a new XFX tube mill, ask which replacement items and consumables are appropriate for the selected line, HF welding section and cutting system. There is no universal standard spare-parts package on this page.
Tell us the equipment scope
Identify the planned mill, auxiliary machines and any selected cutting or welding equipment.
Discuss your operating plan
Share important products and whether you want additional inventory for routine maintenance.
Confirm the proposal
Request an itemized parts list with quantities and applicability to the quoted configuration.
Spare-parts scope, documentation and support are determined in the individual project proposal.
06 / QUOTATION REVIEW
Make the part and compatibility basis explicit.
These are buyer review points, not automatic inclusions or fixed commercial terms.
Exact item & quantityPart name, version, count and any associated accessories.
Matching evidenceMachine model, measurements, markings, drawings or sample used to check fit.
Technical scopeMaterial or specification only where needed for the quoted item.
DocumentationApplicable drawings or instructions to be supplied.
Commercial termsPackaging, lead time and warranty terms in the actual quotation.
SupportInstallation or technical guidance, if included for this project.
08 / FACTORY & SUPPORT
Discuss the actual part with XFX.
XFX has its own factory in China. XFX can discuss part identification, remote technical support, spare-parts support and operation or maintenance information where applicable.
On-site installation, commissioning or training may be relevant to machinery projects; no overseas visit or installation service is automatically included with a single replacement part. Confirm service scope in the proposal.
Contact XFX ↗
09 / BUYER QUESTIONS
Spare-parts questions
What should I send for a spare-part quotation?
Start with the machine model and section, part name, quantity, clear photos and any marking or part number. Dimensions, drawings or a sample may be needed to confirm the item.
Can XFX discuss parts for a non-XFX mill?
Yes, with sufficient evidence to review the installed machine and interfaces. Please send whole-machine and part photos, measurements, markings and drawings where available. Compatibility is not assumed from the brand alone.
Is the machine model number enough?
Not always. Different configurations and later changes may affect fit. The actual part and installation position should be checked.
Can I send photos of a broken part?
Yes. Include the whole machine, installed position, close-up and any marking. Photos help start the discussion but may not replace accurate measurements or a drawing.
What extra details help with welding or cutting parts?
For HF parts, include welder and tube information plus old-part dimensions. For saw blades, include the cutting machine, blade marking and size, tube material and tube sizes with wall thickness.
Can XFX supply parts with a new tube mill?
Discuss the spare-parts list alongside the selected equipment. The actual item and quantity scope belong in the project proposal.
Will one new part fix the machine problem?
That cannot be guaranteed from a reported symptom. The part and surrounding machine condition may both need inspection before the cause and solution are confirmed.
10 / REQUEST SPARE-PARTS SUPPORT
Send machine and part details for review.
Tell us whether the item is for an XFX machine, another installed mill or a new project. Include part photos, markings, quantity and dimensions or a drawing if available. You can start with partial information.
View the Contact page ↗SEND AN INQUIRY
Request Tube Mill Spare Parts
In the message field, include the part and equipment names, machine model, quantity, markings and dimensions if known. Explain whether the machine is XFX-supplied, another brand or a new project. The tube-production fields are optional when they do not apply to your part.
To share old-part photos, drawings or a sample discussion, use WhatsApp or email. This text form does not upload files.