TUBE MILL ROLL-STAND SPARES
XFX lists the Horizontal Shaft as a tube mill roll-stand spare associated with rotation and roll tooling installation during forming or sizing. Send the old part, its stand position and a drawing or measurements so XFX can review a replacement.
The line model or one photo cannot establish the correct shaft on its own.
01 / PRODUCT IDENTITY
The saved XFX detail places Horizontal Shafts in tube mill roll stands and describes a role in rotation and roll tooling installation for forming or sizing work. It does not publish a drawing defining every version of this part.
XFX also has a separate Transmission Shaft listing that explicitly describes a gearbox-to-roll-stand connection. Do not choose a spare from either name alone; identify the actual position and old component.
02 / IDENTIFICATION CHECKLIST
Start with what you have. A drawing or reliable measured dimensions may be needed before the replacement is confirmed.
These are buyer-supplied identification details, not published XFX shaft specifications. If the original material or hardness requirement is known, include it with the drawing; no XFX grade or hardness is stated here. Send photos or drawings by WhatsApp or email because the text form has no file upload.
03 / EXISTING-MACHINE ROUTES
Send the original line model and project information if known, machine section and stand position, old-shaft photos and markings, drawing or dimensions, related bearing or mating component details and quantity. The model alone may not identify the part.
Discuss an XFX replacement ↗Provide the maker and model if known, installation and full-part photos, drawing or measured geometry, bearing and connection details where relevant, mating components, sample availability and quantity. XFX can review the enquiry; manufacture or compatibility is not promised.
Send existing-shaft details ↗04 / FIT & CONDITION
Geometry, bearing locations, stepped areas, connections and mounting arrangement can differ. A machine brand, line model, one diameter or one photo cannot by itself confirm fit. The actual old part and related stand components may need comparison before supply is agreed.
If a shaft is worn, bent, scored or damaged, describe the condition and provide photos. The shaft, bearings, mating components, alignment and surrounding stand may need review together; replacing the shaft alone is not a guaranteed fix for vibration or tube-quality problems.
05 / BUYER QUESTIONS
Its saved listing places the part in tube mill roll stands, supporting rotation and roll tooling installation in forming or sizing work. Confirm the exact installed shaft before ordering.
XFX lists them separately. The Transmission Shaft page explicitly describes a gearbox-to-roll-stand connection; this page focuses on the Horizontal Shaft listing's roll-stand and tooling role. Do not assume the parts are interchangeable.
No universal fit is stated. Dimensions, mounting, bearing positions and mating components must be reviewed for the actual machine.
It is a useful starting point, but send the stand position, old-part photos and a drawing or measurements where possible.
You may send the existing part and machine information for review. Fit and supply cannot be confirmed from a single photo or model name.
Not necessarily. Bearings, mating parts, alignment and the stand condition may also need to be checked.
06 / DISCUSS A REPLACEMENT
Start with the machine and stand position, full-part photos, drawing or measurements and required quantity. Tell XFX whether this is an XFX-supplied machine or another existing line.
View the Contact page ↗SEND AN INQUIRY
Describe the tube mill model, stand position, shaft markings, drawing or measured dimensions, bearing or connection details and quantity. Send photos or a drawing separately by WhatsApp or email; this text form has no file upload.