TUBE MILL MECHANICAL SPARES
XFX lists bearings for tube mill roll stands, tooling positions, gearboxes, cutting sections and auxiliary equipment. Send the complete marking from the old bearing, clear photos, quantity and its machine position so XFX can review the replacement.
A tube mill model or a partial bearing number alone cannot confirm interchangeability.
01 / PRODUCT IDENTITY
XFX lists bearings for roll stands, tooling positions, gearboxes, cutting equipment and auxiliary machines. It does not identify one bearing model that fits every location.
XFX lists Bearing Sleeves as a separate spare part. Depending on the machine position, the bearing and its sleeve, shaft or mating parts may need to be checked together; they are not automatically the same item or a supplied set.
02 / IDENTIFICATION CHECKLIST
Start with the old bearing. Incomplete initial details are welcome, but the exact part must be reviewed before supply is confirmed.
These are buyer-supplied identification details, not XFX published bearing specifications. Send photos or a drawing by WhatsApp or email; the text form below has no file upload.
03 / EXISTING-MACHINE ROUTES
Send the original line or machine model, equipment section and bearing position, the complete old-bearing code and photos, quantity and project information if known. Describe the replacement issue when useful. The machine model alone may not identify the bearing.
Discuss an XFX replacement ↗Provide the maker and model if known, machine or stand position, full bearing marking and any visible maker name, photos of both sides and quantity. If marking is missing, add measured dimensions, related shaft/housing information and sample availability. Supply or fit remains subject to review.
Send existing-bearing details ↗04 / FIT & CONDITION
The complete model code, suffix, dimensions, installation position and machine requirements should be checked. Matching inner and outer diameters, a similar-looking number or one machine model cannot by itself confirm an equivalent replacement.
If a bearing is noisy, hot, loose, seized or damaged, describe what happened and share photos. Bearing condition, lubrication, shaft or sleeve condition, fit, alignment and surrounding parts may need review together. Replacing the bearing alone is not a guaranteed fix for noise, heat or vibration.
05 / BUYER QUESTIONS
Send the full old-bearing marking exactly as printed, clear photos of both sides, required quantity and machine position.
The complete code matters for technical review. A similar main number with a different ending is not automatically interchangeable.
Send full bearing photos, reliable inner diameter, outer diameter and width measurements, machine position and a sample if needed.
No. It is useful context, but the old bearing, its marking or dimensions and installed position still need checking.
No. XFX lists Bearing Sleeves separately. Send both part details if the mating sleeve also needs attention.
Not necessarily. Lubrication, fit, shaft or sleeve, alignment and nearby machine parts may also need review.
06 / DISCUSS A REPLACEMENT
Start with the full marking, both-side photos, quantity and equipment position. If the code is missing, send measured dimensions and old-part details. Tell XFX whether the equipment came from XFX or another maker.
View the Contact page ↗SEND AN INQUIRY
Enter the complete old-bearing code and suffix, equipment position and quantity. If the code is unreadable, describe the old bearing and available measurements. Send sharp photos separately by WhatsApp or email; this text form has no file upload.